Specification: ●Product name: Desktop three-port eyewash ●Production standard: American ANSI Z358.1-2014 ●Main material: thick copper plating ●Nominal pressure: 1.0Mpa ●Working pressure: 0.2～0.4Mpa ●Eyewash flow rate: ≥11.4L/min ●Water inlet size: M24X1 external thread (M22X1 internal thread, M22X1 external thread, G1/2 internal thread, G3/4 internal thread) ●Product size: L*W*H=150*60*150mm ●Using medium: meet the sanitary standard room temperature domestic water ●Switch mode: The clean water is automatically sprayed from the eyewash nozzle. The control valve body has a button for switching between eyewashing and handwashing. The button is pulled to the outermost side for eyewashing , The button is pulled to the innermost side to wash your hands. The eyewash nozzle has a built-in double-layer filter to filter impurities in the water. Using the principle of slow pressure to make the water flow into a foamy water column, it can effectively prevent impurities in the water or causing secondary damage to the injured eye nerves and injured parts due to excessive water flow. ●This product is suitable for use in areas where the ambient temperature is higher than 0°C. Please pay attention to antifreeze and heat preservation when used in an environment of 0°C and below ●Applicable places: widely used in nuclear energy, power stations, pharmaceuticals, medical, chemical, petroleum, electronics, smelting, printing and dyeing, education and scientific research and other units, industries or fields.